WoodesRogers Quest part 2

[Grey Roger]

I wonder what that could be...

No idea what it's meant to be, but I've seen pictures of something like that before, and if the booth isn't properly nailed down then it's about to go straight through the altar at high velocity.

Never trust a rocket scientist who has no eyebrows. Or hair. Or much of anything else.

 

[Pieter Boelen]

Never trust a rocket scientist who has no eyebrows. Or hair. Or much of anything else.

Important life lessons right there!

 

[salonikasurf]

I did the scene with the electricity on just to see it - well done JRH.

Important life lessons right there!

 

[salonikasurf]

I have played / tested the Woods Rogers storyline right up till the Alchemy Page 12. I am actually seriously impressed with the amount of work @Jack Rackham has put into this. Couple of things I did though - I hired Rys as an office in part 1 even though he was not able to be an officer in the passenger list - but I could use him early on to captain captured ships. I also gave him a lot of stuff during the game which I could get back off him after the totally down and out stages. As always - save often with Windows 10.

Just finished the entire storyline without jump starts - impressive and surprising finale scene. Hats of to you Jack!

 

[Jack Rackham]

Good to hear you liked it @salonikasurf !
It was a lot of work and took time. Part 2 = 5 years. The electricity scene concists of 12 effects in 4 phases.
And the "red house" is, as you might have guessed, my home.

 

[Jack Rackham]

Someone has changed the texture file lampK3.tga. That means the lamps in two locations look very bad. Here's a fix to reset what
I once wanted. Without spoiling anything else.

 

[Grey Roger]

Thanks, @Jack Rackham!

Would I be right in thinking that "lampK4.tga.tx" is a copy of the original "lampK3.tga.tx"? The new one appears to be another of the new textures from "Corsairs-Harbour.ru" and I'd be willing to bet that it fouls up other lamps as well. My suggestion would be to put your locations back to using "lampK3.tga.tx", rename "lampK4.tga.tx" back to "lampK3.tga.tx", and I'll put the original "lampK3.tga.tx" into the next update. Or possibly I'll make a new version which combines the best parts of both, then use GM Viewer to check that your locations look decent with that version.

 

[Jack Rackham]

Would I be right in thinking that "lampK4.tga.tx" is a copy of the original "lampK3.tga.tx"?

Yes.
I'm open to any alternative that leaves the lamps in the original black metal style. At least for "my" two locations.

 

[Grey Roger]

Here's my alternative. It uses the wood texture from the new version, the metal texture from the original, and the original lamps brightened up. Apart from having a grid framework on the lamp glass, the original has some of the lamps coloured red which the new version does not.

Try changing your locations back to using "lampK3.tga.tx", then see how they look with this file. If that's no good either then I'll just put the original file into the next update.

 

[Jack Rackham]

I have tested now. In the two locations where I have used this lamp no wood is visible so the lamps looks the same with original or merged texture.
Use the merged one if you find it better somewhere else.

 

[Grey Roger]

Is it possible to visit either of your locations at night? The main difference between the original texture and my new version is that the lamps should look a bit brighter at night.

The "Corsairs" version of the lamp texture certainly does affect some other places the same way it affected yours. Here's a lamp in Charlestown - original, Corsairs, mine:


And at night:

 

[Jack Rackham]

Is it possible to visit either of your locations at night?

Yes.

SetCurrentTime(02.00, 0);
DoQuestReloadToLocation("BB_Eden_estate", "reload", "reload6" ,"_");

 

[Jack Rackham]

I have reworked two parts of WoodesRogers (1). The very first swamp island and the roofs in QC. They both now have proper
walk patches. (Not just jumping from spot to spot).

Also noticed that QC town didn't have any smoke from chimneys so that is fixed.

 

[Grey Roger]

I have reworked two parts of WoodesRogers (1). The very first swamp island and the roofs in QC. They both now have proper
walk patches. (Not just jumping from spot to spot).

Also noticed that QC town didn't have any smoke from chimneys so that is fixed.

Got it - thanks!

 

[Grey Roger]

Though I'd copied the contents of that zip file into my update folder, I hadn't got round to copying it into my game installation until now, and that's when I spotted a problem. "WR reworked 6625.7z" contains folder "RESOURCE\MODELS\Locations\Town_QC" with the new files. Should they go into "RESOURCE\MODELS\Locations\Town_QC\Town" instead?

 

[Jack Rackham]

Yes, I placed them wrong in the folder. Thanks for finding it!

 

[Grey Roger]

Thought so. When I put the new files into the "Town" folder, some of the chimneys in Pirate Settlement started smoking.

But not all of them - some of the smaller houses with thatched roofs have chimneys which are still smokeless. Is that intentional for "Woodes Rogers"?

 

[Jack Rackham]

That would be the effect of a 30 % chance of smoke in PROGRAM/Locations/particles.c.
Go there again and other chimneys would be smoking.

 

[BathtubPirate]

I'd like to play Woodes Rogers part 2 again, because the first time, I never finished it for some reason. I know I can do the Alchemy opening, because I've done it before. But I'm not quite sure where to start.

Walkthrough says:

• Unlock the two doors to the new part. Minerva arrives to guide you with your alchemical experiments.

I open one door. From the laboratory to the secret laboratory. The key for that was in the bandages in the wardrobe (next to the newspaper articles). After entering the secret laboratory, the character stops for a moment and I hear Minerva, but don't see her. Which other door?

 

[Jack Rackham]

The door from Minerva's room to the secret (new) lab (upstairs).